Brandium R5 Residence F:4 D:28 Atasehir / Istanbul - TURKEY
The AKTEK Model TP6100M Emergency Pressure Relief Valve is designed to provide emergency relief capacity beyond that provided by the normal operating pressure relief valve on the tank. The valve protects the tank from rupture or internal pressures caused by exposure to fire, etc. Model TP6100M is designed to be self-closing. As excessive pressure builds up, Model TP6100M releases, then reseats when overpressure has dissipated. Counterweights are available for lower settings.
• Available in sizes 24″, 30″, 32″, 34″, and 36″.
• Pressure settings: 1.5 – 8 oz/in².
• Vacuum settings: 0.5 – 4 oz/in².
• Hinged with a lift stop for positive reseating.
• Available in carbon steel, stainless steel, and other materials.
Overpressure Protection: The primary function of the Emergency Pressure Relief Valve is to protect storage tanks and vessels from overpressure situations. It automatically activates to release excess pressure, preventing potential damage to the tank.
Rapid Response in Emergency Scenarios: In emergency situations where pressure within the tank reaches critical levels, the valve provides a rapid response by relieving pressure, preventing catastrophic failure and ensuring the safety of the system.
Protection Against Rupture: The valve acts as a safeguard against tank rupture or catastrophic failure, which can result from extreme pressure conditions. This helps in preserving the structural integrity of the tank.
Automatic Reset: After relieving excess pressure, the Emergency Pressure Relief Valve typically features an automatic reset mechanism. This ensures that the valve is ready for operation in subsequent pressure build-up events.
Counterweights for Adjustable Settings: Many models of Emergency Pressure Relief Valves come with counterweights, allowing for adjustable pressure settings. This adaptability ensures that the valve can be tailored to the specific pressure requirements of the application.
Prevention of Environmental Hazards: By preventing overpressure situations, the valve contributes to environmental protection by minimizing the risk of leaks or releases of hazardous substances into the environment.
Equipment and Asset Protection: The valve protects not only the tank but also associated equipment and pipelines from potential damage caused by pressure fluctuations, ensuring the longevity and reliability of the entire system.
Compliance with Safety Standards: Emergency Pressure Relief Valves are designed to meet industry safety standards and regulations. Their implementation aids in compliance with environmental and safety guidelines.
Reduced Risk of Explosions: By preventing the formation of explosive atmospheres within the tank, the Emergency Pressure Relief Valve significantly reduces the risk of explosions, enhancing overall safety in industrial settings.
Long-Term Cost Savings: The implementation of a reliable Emergency Pressure Relief Valve system results in long-term cost savings by preventing potential equipment damage, environmental cleanup costs, and regulatory fines.
In summary, the Emergency Pressure Relief Valve is a critical component in ensuring the safety and integrity of storage tanks, providing protection against overpressure situations and contributing to the overall reliability of industrial systems.
Oil and Gas Industry: Emergency Pressure Relief Valves are widely used in the oil and gas industry to protect storage tanks and vessels from overpressure events, ensuring the safety and integrity of the equipment.
Chemical Processing Plants: Facilities in the chemical processing industry employ Emergency Pressure Relief Valves to safeguard against overpressure situations, preventing potential damage to tanks and maintaining a safe operating environment.
Refineries: Refineries utilize Emergency Pressure Relief Valves as a critical safety measure to protect storage tanks and equipment from excessive pressure, reducing the risk of catastrophic failures.
Petrochemical Plants: In petrochemical plants, where various volatile substances are handled, Emergency Pressure Relief Valves are essential for preventing overpressure scenarios and ensuring the safe operation of storage vessels.
Storage Terminals: Tank storage terminals for various liquids, including petroleum products and chemicals, incorporate Emergency Pressure Relief Valves to enhance safety during storage and handling operations.
Chemical Distribution Facilities: Facilities involved in the distribution of chemicals use Emergency Pressure Relief Valves to mitigate the risk of overpressure, safeguarding against potential hazards during storage and transportation.
Industrial Tank Farms: Tank farms, where multiple storage tanks are clustered together, benefit from the installation of Emergency Pressure Relief Valves to provide comprehensive protection against pressure fluctuations.
Manufacturing Plants: Various manufacturing plants utilize Emergency Pressure Relief Valves to protect process vessels and tanks from overpressure events, contributing to the safety of manufacturing operations.
Environmental Protection Systems: Industries focused on environmental protection implement Emergency Pressure Relief Valves to prevent the release of hazardous substances into the environment during unexpected pressure surges.
Wastewater Treatment Facilities: In wastewater treatment plants, Emergency Pressure Relief Valves contribute to safety by preventing overpressure situations in storage tanks, protecting equipment and personnel.
Marine Applications: Ships and marine vessels may employ Emergency Pressure Relief Valves to protect storage tanks from overpressure during transportation, ensuring safety at sea.
These applications highlight the crucial role of Emergency Pressure Relief Valves across various industries where the prevention of overpressure events is essential for safety, environmental protection, and regulatory compliance.